The global 3D Medical Imaging Devices market size is expected to be worth around US$ 21.8 billion by 2030, according to a new report by Vision Research Reports.
The global 3D Medical Imaging Devices market size was valued at US$ 11.8 billion in 2020 and is anticipated to grow at a CAGR of 6.9% during forecast period 2021 to 2030.
High prevalence of cancer, cardiovascular diseases, and Alzheimer’s among other chronic diseases is projected to drive the growth. Rise in healthcare expenditure across developed economies and rapid technological advancements are other prime factors responsible for the market growth.
Few noteworthy technological advancements include development of imaging systems with low radiation levels and increasing approvals of contrast and media/agents. For instance, in April 2016, Bracco Diagnostics, a U.S. based subsidiary of Bracco Imaging S.p.A., an Italian giant in the 3D imaging; received approval from the U.S. Food and Drug Administration (FDA) for its new ultrasound contrast agent Lumason, for pediatric and adult patients. In another instance, Germany based healthcare company, Bayer Healthcare received FDA approval in May 2016 for Gadovist injection used in the angiography procedures in U.S. Such factors are expected to bode well for the global market growth over the forecast period.
On the basis of device type, the 3D medical imaging devices market is classified into X-ray, Computed Tomography (CT) devices, ultrasound systems, and Magnetic Resonance Imaging (MRI) equipment. In 2017, the CT segment accounted for the major market share. The nuclear imaging segment is anticipated to expand at the highest CAGR over the forecast period due to high demand for increasing incidence of cancer cases, globally.
The ultrasound systems segment is expected to register a CAGR of approximately 7.0% over the forecast period. The high growth is attributed to the increase in ultrasound scans across the world and new product launches by the industry behemoths. For instance, in June 2019, Siemens Healthineers introduced a new ultrasound system Acuson Sequoia. The system features contrast-enhanced ultrasound imaging, and its BioAcoustic technology increases the bubble longevity and sensitivity and reduces the diagnosis time.
Based on application, the market is segmented into oncology, cardiology, and orthopedic. The orthopedic segment accounted for the largest market share in 2017, whereas, cardiology segment is anticipated to register highest CAGR in the market for 3D medical imaging devices over the forecast period.
The growth in the orthopedic segment is attributed to the rise in road traffic accidents and high number of geriatric population with musculoskeletal disorders. As per the International Osteoporosis Foundation (IOF), an estimated 8.9 million fractures occur every year, which are attributable to osteoporosis and the disease affects more than 75 million people in Europe, U.S., and Japan.
Based on solution, the market is segmented into 3D scanning, rendering, and modeling. In 2017, 3D rendering accounted for the largest market share. This growth can be attributed to the efficient ray tracing algorithms of 3D rendering solutions for organ visualization.
The 3D modeling segment is expected to register the highest CAGR over the forecast period. The growth can be accredited to the increasing usage of 3D modeling anatomical models in the surgical procedures. These solutions save time and enable surgeons to perform surgeries efficiently.
Geographically, the market is segmented into North America, Europe, Asia Pacific, Latin America, and Middle East and Africa (MEA). North America, followed by Europe, collectively accounted for more than 60% market share in 2019. The growth of the North America region is attributed to the higher purchasing power of the healthcare settings, such as hospitals, long term care centers, and advanced specialty centers. Moreover, well established healthcare infrastructure compared to developing regions coupled with favorable reimbursement scenario is anticipated to bode well for regional growth during the forecast period.
Siemens Healthineers; Esaote SpA; Koninklijke Philips N.V.; GE Healthcare Ltd.; Canon Medical Systems; Hitachi Medical Systems; Shimadzu Corporation; DigiRad Corporation; and Del Medical Systems Inc.
Device Type Outlook
Middle East & Africa
The 3D Medical Imaging Devices market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.
The report provides size (in terms of volume and value) of 3D Medical Imaging Devices market for the base year 2020 and the forecast between 2021 and 2030. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.
This report focuses on the global 3D Medical Imaging Devices market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the 3D Medical Imaging Devices market development in United States, Europe and China.
It is pertinent to consider that in a volatile global economy, we haven’t just conducted 3D Medical Imaging Devices market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.
In terms of production side, this report researches the 3D Medical Imaging Devices capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.
In terms of consumption side, this report focuses on the consumption of 3D Medical Imaging Devices by regions (countries) and application.
Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global 3D Medical Imaging Devices market. These figures have been provided in terms of both revenue and volume for the period 2017 to 2030. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.
With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major 3D Medical Imaging Devices market companies.
Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of 3D Medical Imaging Devices market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.
The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.
Overall, this is an in-depth research report specifically for the 3D Medical Imaging Devices industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.
The 3D Medical Imaging Devices market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to 3D Medical Imaging Devices market.
Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of 3D Medical Imaging Devices market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.
Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new 3D Medical Imaging Devices market. These factors have benefited the growth of the global market for 3D Medical Imaging Devices. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.
New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for 3D Medical Imaging Devices. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).
In this study, the years considered to estimate the market size of 3D Medical Imaging Devices are as follows:
Reasons to Purchase this Report:
- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.
This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.
Market Size Estimation
Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).
The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.
Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.
All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.
Market Breakdown and Data Triangulation
After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.
Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.
In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.
The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.
The study objectives of this report are:
Temperature Controlled Packaging Solutions Market (By Product: Insulated Container, Insulated Shipper; By Application: Food & Beverage, Healthcare, Others) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...
Viral Vectors & Plasmid DNA Manufacturing Market (By Type: Adenovirus, Retrovirus, Plasmid DNA, AAV, Lentivirus, Others; By Workflow: Upstream Processing, Downstream Processing; By Application: Antisense & RNAi, Gene, Cell Therapy, Vaccinology; By End-use: Pharmaceutical and Biopharmaceutical Companies; By Disease: Cancer, Genetic Disorders, Infectious Diseases, Others) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...
Healthcare Facilities Management Market (By Product: Plumbing, Air Conditioning Maintenance, Fire Protection Systems, Mechanical and Electrical Maintenance, Cleaning and Pest Control, Laundry; By Application: Hospital, Ambulatory Service Centers, Clinics, Others) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...
Glioblastoma Multiforme Treatment Market (By Treatment: Surgery, Radiation Therapy, Chemotherapy, Targeted Therapy, Tumor Treating Field (TTF) Therapy, Immunotherapy; By Drug Class: Temozolomide, Bevacizumab, Lomustine, Carmustine Wafers, Others; By End-use: Hospitals, Clinics, Ambulatory Surgical Centers) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...
High Pressure Contrast Media Injectors Market (By Product: Injector Systems, Consumables; By Type: Single head injectors, Dual head injectors, Syringeless injectors; By Application: Interventional cardiology, Interventional radiology, Endovascular surgery, Interventional neuroradiology; By End-use: Hospitals, Diagnostic, Ambulatory Surgical Centers) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...