The global Automotive Axle market size is expected to be worth around US$ xx billion by 2028, according to a new report by Vision Research Reports.
The global Automotive Axle market size was valued at US$ 59.19 billion in 2020 and is anticipated to grow at a CAGR of 1.2% during forecast period 2021 to 2028.
Increasing demand for luxury and hybrid vehicles, coupled with growing demand for long trailers to minimize transportation cost, is anticipated to drive the market for automotive axle over the forecast period. Besides, rising penetration of lift axles in Heavy Commercial Vehicles (HCVs) for better fuel efficiency has resulted in significant market growth.
Rapidly growing e-commerce industry across the globe has been putting pressure on the transportation and logistics industry with extreme focus on the road freight transport. Therefore, long trailers are devoted to keep pace with the changing transportation industry landscape. These trucks can be used to transport goods over thousands of miles. Long trailers have the capability to carry higher volumes of goods per journey as compared to standard trucks, which reduces the overall transportation cost, thus improving the profit margins of the logistic service providers. A long trailer has 6 axles on an average for even load distribution. Hence, growing demand for trailer trucks across the logistics sector is anticipated to directly influence the demand for automotive axles over the forecast period.
Based on type, the market for automotive axle is segmented into drive, dead, and lift. The drive segment held a dominant share of 56.6% in 2019 based on volume and is expected to expand at the highest CAGR over the forecast period. Growing demand for all-wheel-drive vehicles would take a toll on the adoption of drive-type automotive axles. Besides, increasing production of commercial vehicles across Europe and North America will fuel the segment growth from 2020 to 2027.
The rear application segment dominated the market in 2019 and accounted for a share of 56.2% in terms of volume. The market share in terms of volume is expected to increase significantly over the forecast period. The growth can be attributed to increasing production of commercial vehicles across the developed and emerging economies as most of the commercial vehicles have rear driven axles. Additionally, growth of the logistics industry is expected to surge the demand for the long trailer, subsequently influencing the segment growth over the forecast period.
The front application segment is estimated to exhibit a value-based CAGR of 1.5% from 2020 to 2027. The growth can be attributed to increasing production of economy and mid-range segment cars. Moreover, increasing penetration of all-wheel-drive vehicles, such as four-wheel-drive (4WD), six-wheel-drive (6WD), and eight-wheel-drive (8WD), is estimated to contribute to the segment growth over the forecast period.
The passenger car segment is anticipated to hold a dominant share throughout the forecast period. Increasing production of passenger cars across emerging countries, such as India, Mexico, Indonesia, and South Africa, is expected to influence the segment growth. Additionally, rising production of Front Wheel Drive (FWD) and All-Wheel Drive (AWD) vehicles is anticipated to encourage automotive axle manufacturers to develop advanced automotive axles for luxury and hybrid passenger cars. Penetration of the all-wheel-drive systems is higher in Europe and North America as compared to other regions.
North America is projected to expand at a CAGR of 1.7%in terms of volume over the forecast period. The growth can be attributed to growing demand for luxury cars and commercial vehicles in the region. U.S. held majority of the share in the North America market in 2019. Around 8.32 million commercial vehicles and 2.54 million passenger vehicles were manufactured in the country in 2019. Since 2015, the country is witnessing a perpetual decline in passenger car production. However, this decline is compensated by increasing production of light commercial vehicles and heavy commercial vehicles.
Dana Incorporated; Daimler AG; GNA Group; Meritor, Inc.; ZF Friedrichshafen AG; Melrose Industries PLC; and Talbros Engineering Limited.
Vehicle Type Outlook
Light Commercial Vehicle (LCV)
Heavy Commercial Vehicle (HCV)
Rest of the World (RoW)
The Automotive Axle market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.
The report provides size (in terms of volume and value) of Automotive Axle market for the base year 2020 and the forecast between 2021 and 2028. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.
This report focuses on the global Automotive Axle market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Automotive Axle market development in United States, Europe and China.
It is pertinent to consider that in a volatile global economy, we haven’t just conducted Automotive Axle market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.
In terms of production side, this report researches the Automotive Axle capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.
In terms of consumption side, this report focuses on the consumption of Automotive Axle by regions (countries) and application.
Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global Automotive Axle market. These figures have been provided in terms of both revenue and volume for the period 2017 to 2028. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.
With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major Automotive Axle market companies.
Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of Automotive Axle market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.
The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.
Overall, this is an in-depth research report specifically for the Automotive Axle industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.
The Automotive Axle market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to Automotive Axle market.
Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of Automotive Axle market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.
Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new Automotive Axle market. These factors have benefited the growth of the global market for Automotive Axle. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.
New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for Automotive Axle. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).
In this study, the years considered to estimate the market size of Automotive Axle are as follows:
Reasons to Purchase this Report:
- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.
This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.
Market Size Estimation
Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).
The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.
Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.
All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.
Market Breakdown and Data Triangulation
After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.
Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.
In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.
The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.
The study objectives of this report are:
Metaverse Market (By Product: Hardware Software, Services; By Platform: Desktop, Mobile, Headsets; By Technology: Blockchain, VR & AR, MR; By Offering: Virtual Platforms, Asset Marketplaces, Avatars, Financial Services; By Application, By End Use) - Global Industry Analysis, Size, Share, Growth, Trends, Regional Outlook, and Forecast 2022 – 2030Read more...
Core Banking Software Market (By Solution: Deposits, Loans, Enterprise Customer Solutions; By Service: Professional Service, Managed Service; By Deployment: Cloud, On-premise; By End-use: Banks, Financial Institutions) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2022 – 2030Read more...
Payment Gateway Market (By Type: Hosted, Non-hosted; By Enterprise Size: Large Enterprises, Small & Medium Enterprises; By End-use: BFSI, Media & Entertainment, Retail & E-commerce, Travel & Hospitality) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2022 – 2030Read more...
Smart Pole Market (By Component: Hardware, Software, Service; By Hardware: Lighting Lamp, Pole Bracket & Pole Body, Communication Device, Controller; By Installation Type: New Installation, Retrofit Installation; By Application: Highways & Roadways, Public Places, Railways & Harbors) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2022 – 2030Read more...
Mobile Payment Market (By Technology: Near Field Communication, Direct Mobile Billing, Mobile Web Payment, SMS, Interactive Voice Response System, Mobile App; By Payment Type: B2B, B2C, B2G; By Location: Remote Payment, Proximity Payment; By End-use: BFSI, Healthcare, IT & Telecom, Media & Entertainment, Retail & E-commerce, Transportation) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2022 – 2030Read more...