Automotive Electronic Power Steering Market Size, Share, Growth, Trends, Production, Consumption, Revenue and Forecast 2020 to 2027

The automotive electric power steering (EPS) market size was valued at USD 19.90 billion in 2019, and it is expected to register a CAGR of 6.76% during the forecast period (2020-2027).

The automotive electronic power steering market is anticipated to hold potential development opportunities in the coming future. The automobile which has power steering system is likely to experience huge demand. The hybrid electric and electric vehicles with current and innovative technologies such as drive-by-wire are projected to raise the demand/popularity of electronic power steering systems in the years to come. The requirement for decreasing fuel usage and logistical advantages drove the automobile producers to shift from the old age hydraulic power steering systems that had turned into outmoded owing to huge fuel usage, to the new/innovative electric power steering systems thus triggering the development of the automotive electronic power steering market.

Electric power steering (EPS) system is an alternative to traditional steering systems, such as hydraulic and electro-hydraulic systems. The rising popularity of self-driving vehicles is fueling the demand growth in the electric power steering system market, across the world. Vehicles, which are equipped with electric power steering, tend to have a reduced overall weight, which further increases the fuel efficiency.

On the contrary, when compared to the conventional steering systems, the electric power steering systems are costly, and a rise in vehicle recalls, owing to malfunctioning of sensors or other components, may hinder the growth of the market.

Electric systems are significantly fuel efficient, due to the absence of belt-driven hydraulic or manual pumps, which run constantly, whether assistance is required or not. EPS provides fuel savings as high as 0.4 l for every 100 km, along with a reduction in CO2 emissions of up to 7 g/km.

Among regions, Asia-Pacific dominated the automotive EPS market. The Asia-Pacific EPS market is primarily driven by the growing vehicle production and sales, rapid electrification of vehicles, rising stringency of emission norms, and increasing disposable income of consumers. Thus, this is expected to increase the demand for luxury vehicles, owing to the growing preference for safety and comfort.

Overview

The automotive business has gone through several phases of upgradations in power, design, and effectiveness in the last few years. The technology and the automation have brought automobiles to function in several terrains, which were previously meant just for smooth roads. The choice of right steering design provides steadiness and maneuverability to the vehicle in every terrain. The steering method is a mixture of different linkages which are projected to turn the vehicle in bare minimum radius without turning it. Unlike conventional steering, the current automotive electronic power steering includes different electronic mechanisms which help to decrease power and offer perfect turning. The electronic power steering can enhance the driving experience and fuel effectiveness. Earlier, the electronic power steering was utilized only in sports utility vehicles (SUVs) or high-end vehicles. In recent years, the consistency of electronic power steering has developed and improved a lot; as a result, it has boosted its participation in almost each and every category of vehicle. The current electronic power steering is more compact and comprises several other controlling aspects and airbags.

Competitive Players

Some of the most important companies in the global automotive electronic power steering market are Mitsubishi Electric Corporation, Zhuzhou Elite Electro Mechanical Co. Ltd., Robert Bosch Automotive Steering GmbH, Nexteer Automotive, ZF Friedrichshafen Group, JTEKT Corporation, NSK Global, ThyssenKrupp Presta AG, SHOWA Corporation, Hyundai Mobis, and Mando Corporation, among others.

Segmentation

Type
Column Type
Pinion Type
Dual Pinion Type

Component Type
Steering Rack/Column
Sensor
Steering Motor
Other Component Types

Vehicle Type
Passenger Cars
Commercial Vehicles

Geography
North America
Europe
Asia-Pacific
Latin America

The Automotive Electronic Power Steering market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.

The report provides size (in terms of volume and value) of Automotive Electronic Power Steering market for the base year 2019 and the forecast between 2020 and 2027. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.

This report focuses on the global Automotive Electronic Power Steering market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Automotive Electronic Power Steering market development in United States, Europe and China.

It is pertinent to consider that in a volatile global economy, we haven’t just conducted Automotive Electronic Power Steering market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.

In terms of production side, this report researches the Automotive Electronic Power Steering capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.

In terms of consumption side, this report focuses on the consumption of Automotive Electronic Power Steering by regions (countries) and application.

Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global Automotive Electronic Power Steering market. These figures have been provided in terms of both revenue and volume for the period 2016 to 2027. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.

With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major Automotive Electronic Power Steering market companies.

Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of Automotive Electronic Power Steering market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.

The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.

Overall, this is an in-depth research report specifically for the Automotive Electronic Power Steering industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.

Automotive Electronic Power Steering market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to Automotive Electronic Power Steering market.

Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of Automotive Electronic Power Steering market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.

Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new Automotive Electronic Power Steering market. These factors have benefited the growth of the global market for Automotive Electronic Power Steering. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.

New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for Automotive Electronic Power Steering. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).

In this study, the years considered to estimate the market size of Automotive Electronic Power Steering are as follows:

  • History Year: 2016-2019
  • Base Year: 2019
  • Estimated Year: 2020
  • Forecast Year 2020 to 2027

Reasons to Purchase this Report:

- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players

Research Methodology:

In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.

This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.

Market Size Estimation

Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).

The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.

Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.

All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.

Market Breakdown and Data Triangulation

After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.

Secondary Sources

Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.

Primary Sources

 In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.

The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.

The study objectives of this report are:

  • To analyze and study the global market capacity, production, value, consumption, status (2016-2019) and forecast (2020-2027);
  • Focuses on the key manufacturers, to study the capacity, production, value, market share and development plans in future.
  • Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
  • To define, describe and forecast the market by type, application and region.
  • To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
  • To identify significant trends and factors driving or inhibiting the market growth.
  • To analyze the opportunities in the market for stakeholders by identifying the high growth segments.
  • To strategically analyze each submarket with respect to individual growth trend and their contribution to the market
  • To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market
  • To strategically profile the key players and comprehensively analyze their growth strategies.

Table Of Contents

  1. 1. INTRODUCTION

    1. 1.1 Study Assumptions

    2. 1.2 Scope of the Study

  2. 2. RESEARCH METHODOLOGY

  3. 3. EXECUTIVE SUMMARY

  4. 4. MARKET DYNAMICS

    1. 4.1 Market Drivers

    2. 4.2 Market Restraints

    3. 4.3 Porter's Five Forces Analysis

      1. 4.3.1 Threat of New Entrants

      2. 4.3.2 Bargaining Power of Buyers/Consumers

      3. 4.3.3 Bargaining Power of Suppliers

      4. 4.3.4 Threat of Substitute Products

      5. 4.3.5 Intensity of Competitive Rivalry

  5. 5. MARKET SEGMENTATION

    1. 5.1 Type

      1. 5.1.1 Column Type

      2. 5.1.2 Pinion Type

      3. 5.1.3 Dual Pinion Type

    2. 5.2 Component Type

      1. 5.2.1 Steering Rack/Column

      2. 5.2.2 Sensor

      3. 5.2.3 Steering Motor

      4. 5.2.4 Other Component Types

    3. 5.3 Vehicle Type

      1. 5.3.1 Passenger Cars

      2. 5.3.2 Commercial Vehicles

    4. 5.4 Geography

      1. 5.4.1 North America

        1. 5.4.1.1 United States

        2. 5.4.1.2 Canada

        3. 5.4.1.3 Rest of North America

      2. 5.4.2 Europe

        1. 5.4.2.1 Germany

        2. 5.4.2.2 United Kingdom

        3. 5.4.2.3 France

        4. 5.4.2.4 Italy

        5. 5.4.2.5 Russia

        6. 5.4.2.6 Rest of Europe

      3. 5.4.3 Asia-Pacific

        1. 5.4.3.1 China

        2. 5.4.3.2 Japan

        3. 5.4.3.3 India

        4. 5.4.3.4 South Korea

        5. 5.4.3.5 Rest of Asia-Pacific

      4. 5.4.4 Latin America

        1. 5.4.4.1 Brazil

        2. 5.4.4.2 Argentina

        3. 5.4.4.3 Mexico

        4. 5.4.4.4 Rest of Latin America

      5. 5.4.5 Middle-East and Africa

        1. 5.4.5.1 South Africa

        2. 5.4.5.2 Egypt

        3. 5.4.5.3 United Arab Emirates

        4. 5.4.5.4 Rest of Middle-East and Africa

  6. 6. COMPETITIVE LANDSCAPE

    1. 6.1 Vendor Market Share

    2. 6.2 Company Profiles

      1. 6.2.1 Hubei Henglong Auto System Group

      2. 6.2.2 Denso Corporation

      3. 6.2.3 GKN PLC

      4. 6.2.4 Hitachi Automotive Systems Ltd

      5. 6.2.5 Hyundai Mobis Co. Ltd

      6. 6.2.6 JTEKT Corporation

      7. 6.2.7 Mitsubishi Electric Corporation

      8. 6.2.8 Nexteer Automotive

      9. 6.2.9 NSK Ltd

      10. 6.2.10 Robert Bosch GmbH

      11. 6.2.11 Thyssenkrupp Presta AG

      12. 6.2.12 ZF Friedrichshafen AG

  7. 7. MARKET OPPORTUNITIES AND FUTURE TRENDS

Proceed To Buy

USD 4500
USD 3800
USD 1900
USD 1200

Customization Offered

  • check-imgCross-segment Market Size and Analysis for Mentioned Segments
  • check-imgAdditional Company Profiles (Upto 5 With No Cost)
  • check-img Additional Countries (Apart From Mentioned Countries)
  • check-img Country/Region-specific Report
  • check-img Go To Market Strategy
  • check-imgRegion Specific Market Dynamics
  • check-imgRegion Level Market Share
  • check-img Import Export Analysis
  • check-imgProduction Analysis
  • check-imgOthers