The global Continuous Passive Motion Devices market size is expected to be worth around US$ 1.07 billion by 2028, according to a new report by Vision Research Reports.
The global Continuous Passive Motion Devices market size was valued at US$ 657.05 million in 2020 and is anticipated to grow at a CAGR of 6.38% during forecast period 2021 to 2028.
The increasing number of government initiatives along with the increasing number of ageing population are expected to drive the market growth over the forecast period.
CPM is initiated in the recovery room immediately post surgery procedure or during the early postoperative period. The therapy time may range from 1 to 24 hours of treatment per day and is used as an adjunct to physical therapy that may continue for 1 to 6 weeks depending on the degree of rehabilitation required. In February 2016, BTL launched BTL-CP Motion with 13 automatic preset protocols and 50 user defined protocols that improves movement for better therapy outcomes.
Factors such as the rising prevalence of disorders linked with trauma, joint replacement, or ligament reconstruction boost the CPM devices market. Osteoporosis decreases bone density, causing fracture even after a minor trauma incidence. The condition affects around 8.9 million population annually. The growing concern associated with population suffering from poor bone health has resulted in the development of efficient outpatient rehabilitation systems. Moreover, the improvement in reimbursement scenario, and the preference for minimal invasion offered by CPM devices as compared to surgical procedures are expected to boost the market growth.
The type segment is categorized into knee joint devices, shoulder joint devices, hip joint devices, ankle joint devices and others. Knee joint dominated the type segment of the CPM devices market in 2020 due to the increase in the number of patients shifting to outpatient knee rehabilitation.
The major factor accountable for the market growth is the increasing penetration of rehabilitation services, government regulations that increase patient access to CPM therapy, and the low cost and clinical effective of outpatient rehabilitation in comparison with surgery or hospitalization.
a research conducted by Dr. Volker Sauer in Germany, demonstrated a substantial improvement in knee movement at 6,12, and 52 weeks post surgery. Moreover, it was observed that patients relying on CPM exhibited similar results at 6 weeks of treatment that would require 52 weeks without CPM support.
Based on design, the market is segmented into portable & fixed devices. Fixed devices dominated the design segment in 2018, while portable devices are anticipated to witness the fastest growth in the forecast period.
The rise in the share of portable devices can be attributed to the rising need to the accelerate recovery process from injuries, operations, and other complications. Moreover, the increasing use of rehabilitation devices in home setting along with the introduction of smart CPM devices with real time monitoring & adjustment, have enhanced the recovery process.
The demographics CPM devices market is segmented into children (below 18) and adults (18 and above). Adult patient population dominated the demographics segment in 2020 due to the high number of arthroplasty procedures and the increasing elderly patient population. Many conditions affecting the joint are associated with aging due to factors such as loss in bone mass or density.
More than 54% of aged population is concentrated in only six countries: China, U.S., India, Japan, Germany, and the Russian Federation. Geriatric care is a complex system that requires multidisciplinary effort with the expansion of the geriatric patient population. According to the United Nations, in 2017, around 962 million population aged 60 or above comprising 13% of the total world population that grew at a rate of about 3% annually.
North America dominated the continuous passive motion devices market due to the presence of diverse reimbursement plans, health awareness & presence of key market players. The market growth is attributed to factors such as increased government and other public sector investment to offer rehabilitation services and favorable reimbursement programs.
Furniss Corporation; Surgi-Care, Inc.; Bio-Med Inc.; BTL Corporate; Chattanooga and Chinesport Rehabilitation.
Knee joint CPM Devices
Shoulder joint CPM Devices
Hip joint CPM Devices
Ankle joint CPM Devices
Children (Below 18)
Adult (18 and above)
Middle East & Africa
The Continuous Passive Motion Devices market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.
The report provides size (in terms of volume and value) of Continuous Passive Motion Devices market for the base year 2020 and the forecast between 2021 and 2028. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.
This report focuses on the global Continuous Passive Motion Devices market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Continuous Passive Motion Devices market development in United States, Europe and China.
It is pertinent to consider that in a volatile global economy, we haven’t just conducted Continuous Passive Motion Devices market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.
In terms of production side, this report researches the Continuous Passive Motion Devices capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.
In terms of consumption side, this report focuses on the consumption of Continuous Passive Motion Devices by regions (countries) and application.
Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global Continuous Passive Motion Devices market. These figures have been provided in terms of both revenue and volume for the period 2017 to 2028. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.
With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major Continuous Passive Motion Devices market companies.
Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of Continuous Passive Motion Devices market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.
The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.
Overall, this is an in-depth research report specifically for the Continuous Passive Motion Devices industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.
The Continuous Passive Motion Devices market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to Continuous Passive Motion Devices market.
Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of Continuous Passive Motion Devices market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.
Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new Continuous Passive Motion Devices market. These factors have benefited the growth of the global market for Continuous Passive Motion Devices. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.
New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for Continuous Passive Motion Devices. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).
In this study, the years considered to estimate the market size of Continuous Passive Motion Devices are as follows:
Reasons to Purchase this Report:
- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.
This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.
Market Size Estimation
Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).
The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.
Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.
All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.
Market Breakdown and Data Triangulation
After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.
Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.
In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.
The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.
The study objectives of this report are:
To strategically profile the key players and comprehensively analyze their growth strategies.
Glioblastoma Multiforme Treatment Market (By Treatment: Surgery, Radiation Therapy, Chemotherapy, Targeted Therapy, Tumor Treating Field (TTF) Therapy, Immunotherapy; By Drug Class: Temozolomide, Bevacizumab, Lomustine, Carmustine Wafers, Others; By End-use: Hospitals, Clinics, Ambulatory Surgical Centers) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...
High Pressure Contrast Media Injectors Market (By Product: Injector Systems, Consumables; By Type: Single head injectors, Dual head injectors, Syringeless injectors; By Application: Interventional cardiology, Interventional radiology, Endovascular surgery, Interventional neuroradiology; By End-use: Hospitals, Diagnostic, Ambulatory Surgical Centers) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...
Veterinary Antimicrobial Susceptibility Testing Market (By Animal Type: Livestock Animals, Companion Animals; By Product: Disks & Plates, Culture Media, Accessories & Consumables, Automated AST Instruments; By End-use: Veterinary Reference Lab, Veterinary Research Institutes, Others) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...
Tendonitis Treatment Market (By Treatment: Therapy, Surgery; By Condition: Tennis Elbow, Golfer’s Elbow, Pitcher’s Elbow, Jumper’s Knee, Swimmer’s Shoulder, Achilles Tendonitis) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...
Infectious Disease Molecular Diagnostics Market (By Product: Instruments, Reagents, Services; By End-use: Hospitals, Clinics, Diagnostics Laboratories, Research Institutes; By Technology: Polymerase chain reaction, In Situ Hybridization, Isothermal Nucleic Acid Amplification Technology) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030Read more...