Cosmetic Dentistry Market Size, Share, Trends, Growth, Production, Consumption, Revenue, Company Analysis and Forecast 2021-2030

Published Date : Feb 2021 | No. of Pages : 250 Pages | Category : Healthcare

The global Cosmetic Dentistry market size is expected to be worth around US$ 27.10 billion by 2030, according to a new report by Vision Research Reports.

The global Cosmetic Dentistry market size was valued at US$ 6.10 billion in 2020 and is anticipated to grow at a CAGR of 5.0% during forecast period 2021 to 2030.

Growth Factors

With an increase in the population opting for the improvement of dental aesthetics, this industry has undergone great advancements. Cognizance among the population about such techniques and procedures has allowed this industry to prosper by leaps and bounds. Developing countries have generated a large amount of disposable income, which is the main reason why cosmetic dentistry is flourishing. The geriatric population, in general, has propagated the growth of this industry with old age-related tooth ailments. Dental tourism has been an important reason that has caused cosmetic dentistry to prosper globally.

The major restraints in this market include the lack of reimbursement options for cosmetic procedures and the expensive cost of dental imaging. Insurance companies and government agencies do not regard cosmetic procedures as essential, and thus not many reimbursement options are available for cosmetic dentistry.

Initially, as a short-term impact of COVID-19, global cosmetic dentistry was hampered. Most of the dental clinics had stopped seeing their patients, with only emergency treatments given a permit. This resulted in a lower volume of patient visits and impacted revenue to a great extent. It was reported that there were 19 million fewer routine check-ups at NHS registered dental practices. However, telemedicine became an effective mode of communication for both patients and doctors. On the flip side, in countries such as Australia, due to the longer time spent on Zoom, interest in cosmetic dentistry has increased highlighting some brighter days ahead for the industry.

Report Highlights

Dental systems and equipment accounted for the largest revenue share of 40.6% in 2020. This is attributed to their wide range of applications in the dental industry. Based on the product, the industry is segmented into dental systems and equipment, dental implants, dental crowns and bridges, dental veneers, orthodontic braces, bonding agents, inlays and onlays, and whitening.

Dental systems and equipment include a variety of arrangements like instrument delivery systems, dental chairs, dental handpieces, light-curing equipment, dental scaling units, dental CAD/CAM systems, dental lasers, and dental radiology equipment. With the increase in the population wanting to improve dental aesthetics, the use of orthodontic braces comprising of fixed and removable braces has increased rapidly. Dental implants comprising of titanium implants and zirconium implants are also used on a large scale in individuals who are recovering from disfigurations and accidents.

The North American region dominated the market for cosmetic dentistry and held a share of 37.5% in 2020. This is attributed to the technological advancements and increase in the number of individuals opting for procedures involved in cosmetic dentistry.

The Asia Pacific region is expected to exhibit the highest growth rate in the forecast period. This is mainly due to the increasing amount of disposable income that is being generated in developing countries, like India and China. With a large population in this region, many individuals are inclined toward aesthetically improving dental health. The wide range of dental procedures being offered in this region has allowed the propagation of dental tourism, thus contributing to the regional market growth.

Key Players

  • Danaher Corporation

  • Align Technology Inc.

  • Dentsply International, Inc.

  •  3M Company

  •  Zimmer Biomet Holding, Inc.

  • Institut Straumann AG

  • Sirona Dental Systems, Inc.

  • Biolase, Inc.

  • Planmeca Oy

  • A-dec Inc.

Market Segmentation

  • Product Outlook 

    • Dental Systems & Equipment

      • Instrument Delivery Systems

      • Dental Chairs

      • Dental Handpieces

      • Light Curing Equipment

      • Dental Scaling Units

      • Dental CAM/CAD Systems

      • Dental Lasers

      • Dental Radiology Equipment

    • Dental Implants

    • Dental Crowns & Bridges

    • Dental Veneer

    • Orthodontic Braces

    • Bonding Agents

    • Inlays & Onlays

    • Whitening

  • Regional Outlook 

    • North America

      • U.S.

      • Canada

    • Europe

      • U.K.

      • Germany

    • Asia Pacific

      • China

      • India

    • Latin America

      • Brazil

      • Mexico

    • Middle East & Africa

      • South Africa

The Cosmetic Dentistry market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.

The report provides size (in terms of volume and value) of Cosmetic Dentistry market for the base year 2020 and the forecast between 2021 and 2030. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.

This report focuses on the global Cosmetic Dentistry market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Cosmetic Dentistry market development in United States, Europe and China.

It is pertinent to consider that in a volatile global economy, we haven’t just conducted Cosmetic Dentistry market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.

In terms of production side, this report researches the Cosmetic Dentistry capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.

In terms of consumption side, this report focuses on the consumption of Cosmetic Dentistry by regions (countries) and application.

Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global Cosmetic Dentistry market. These figures have been provided in terms of both revenue and volume for the period 2017 to 2030. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.

With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major Cosmetic Dentistry market companies.

Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of Cosmetic Dentistry market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.

The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.

Overall, this is an in-depth research report specifically for the Cosmetic Dentistry industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.

The Cosmetic Dentistry market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to Cosmetic Dentistry market.

Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of Cosmetic Dentistry market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.

Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new Cosmetic Dentistry market. These factors have benefited the growth of the global market for Cosmetic Dentistry. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.

New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for Cosmetic Dentistry. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).

In this study, the years considered to estimate the market size of Cosmetic Dentistry are as follows:

  • Historic Year: 2017-2020
  • Base Year: 2021
  • Forecast Year 2021 to 2030

Reasons to Purchase this Report:

- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players

Research Methodology:

In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.

This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.

Market Size Estimation

Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).

The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.

Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.

All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.

Market Breakdown and Data Triangulation

After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.

Secondary Sources

Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.

Primary Sources

 In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.

The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.

The study objectives of this report are:

  • To analyze and study the global market capacity, production, value, consumption, status (2017-2020) and forecast (2021-2030);
  • Focuses on the key manufacturers, to study the capacity, production, value, market share and development plans in future.
  • Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
  • To define, describe and forecast the market by type, application and region.
  • To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
  • To identify significant trends and factors driving or inhibiting the market growth.
  • To analyze the opportunities in the market for stakeholders by identifying the high growth segments.
  • To strategically analyze each submarket with respect to individual growth trend and their contribution to the market
  • To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market
  • To strategically profile the key players and comprehensively analyze their growth strategies.

Featured Research Reports

  • Featured Research Reports

    Clinical Trial Equipment & Ancillary Solutions Market (By Product: Sourcing, Supply/Logistics, Service, Others; By Phase: Phase I, Phase II, Phase III, Phase IV) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...
  • Featured Research Reports

    Dental Suction Systems Market (By Product: Wet Suction, Dry Suction; By End-use: Hospitals, Dental Offices) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...
  • Featured Research Reports

    Dental Caries Detectors Market (By Product: Laser Fluorescent Caries Detector, Fiber Optic Trans-illumination Caries Detector; By End-use: Hospitals, Dental Clinics, Ambulatory Surgical Centers) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...
  • Featured Research Reports

    Ophthalmic Perimeters Market (By Product: Static, Kinetic, Combination; By End-use: Hospital, Ophthalmic Clinic, Others) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...
  • Featured Research Reports

    Investigational New Drug CDMO Market (By Product: Small Molecule, Large Molecule; By Service: Contract Development, Contract Manufacturing; By End-use: Pharmaceutical Companies, Biotech Companies, Others (Government, Research Institutes, Academic Institutes, etc.)) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...