The global LTCC And HTCC market size is expected to be worth around US$ 3.6 billion by 2027, according to a new report by Vision Research Reports.
The global LTCC And HTCC market size was valued at US$ 3.02 billion in 2019 and is anticipated to grow at a CAGR of 2.4% during forecast period 2020 to 2027.
The ceramic substrates including LTCC and HTCC are widely used in the consumer electronics such as laptops and microwaves. The rising challenge to constrict the size of the circuit board while enhancing performance and lowering manufacturing cost is predicted to drive the market over the coming years. The key advantages of employing LTCC and HTCC technology in consumer electronics are that it reduces the physical volume and footprint as compared to other traditional technologies. The product produced using these ceramic substrates has lower weight and enables enhanced electrical characteristics such as thermal permittivity, dielectric constant, and reduced transmission losses. Thus, owing to the aforementioned properties, the product is projected to observe steady demand over the forecast period.
However, due to the ongoing global pandemic, the demand for the substrates is likely to observe slow growth owing to the total shutdown of manufacturing facilities around the globe. The impact of pandemic is projected to reduce trade and production of the substrates over the short term period. Another key challenge for the growth of the industry is due to the downturn in automotive production across Europe. Until this trend overturns, the demand for these ceramic substrates in Europe is projected to remain stagnant over the next few years. Similar trends were observed in the automotive sector of North America. Thus, static growth of end-use sectors mentioned above is expected to hamper market growth in the aforementioned regions over the forecast period.
The LTCC segment held more than 73.01% of the global market revenue in 2019. The segment is expected to dominate the market for LTCC and HTCC over the forecast period. Low temperature co-fired ceramic is defined as the process of fabricating a multilayer circuit with conductor lines. The process employs the use of low resistivity materials such as copper, gold, silver, palladium based alloys, and platinum based alloys. The process is performed at a low temperature between 850 to 875 degrees Celsius as compared to its counterpart. The process is widely gaining prominence in the telecommunication industry owing to its properties.
The automotive segment held the largest market share of 42.1% in 2019 and is expected to dominate the market for LTCC and HTCC over the forecast period. The progress towards the development of self-driving vehicles is projected to drive the demand for ceramic substrates. The use of ceramic substrates in automotive electronics components and assemblies has observed significant growth over the last few years.
Asia Pacific held the largest market share of 41.8% in 2019 and is projected to remain the most dominant regional market for LTCC and HTCC over the forecast period. The presence of manufacturing powerhouses such as India, China, and Japan is likely to push market growth. China which is set to launch 5G is expected to remain the key regional market in Asia Pacific. However, the ongoing pandemic situation has widely paralyzed the manufacturing sector of the region. This is expected to restrain the growth of the market for LTCC and HTCC during the forecast period.
Europe is projected to witness stagnant growth over the forecast period. The region is undergoing severe economic challenges. The disruption caused due to the coronavirus in the region is expected to remain a key hurdle for regional market growth. In addition, the automotive industry of the region is also observing slow growth. As per the stats released by the International Organization of Motor Vehicles Manufacturers (OICA) in 2018, the overall production of passenger vehicles in Europe declined from 16.7 million units in 2017 to 16.5 million units in 2018. Thus, regional economic challenges coupled with the declining production trend of automotive vehicles is considered as the key factors hampering the growth of the market for LTCC and HTCC.
Micro System Technologies
Maruwa Co. Ltd.
NGK Spark Plug Co. Ltd.
Yokowo Co. Ltd.
Hitachi Metals Ltd.
Murata Manufacturing Co. Ltd.
Aerospace & Defense
Central & South America
Middle East & Africa
The LTCC And HTCC market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.
The report provides size (in terms of volume and value) of LTCC And HTCC market for the base year 2019 and the forecast between 2020 and 2027. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.
This report focuses on the global LTCC And HTCC market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the LTCC And HTCC market development in United States, Europe and China.
It is pertinent to consider that in a volatile global economy, we haven’t just conducted LTCC And HTCC market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.
In terms of production side, this report researches the LTCC And HTCC capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.
In terms of consumption side, this report focuses on the consumption of LTCC And HTCC by regions (countries) and application.
Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global LTCC And HTCC market. These figures have been provided in terms of both revenue and volume for the period 2016 to 2027. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.
With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major LTCC And HTCC market companies.
Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of LTCC And HTCC market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.
The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.
Overall, this is an in-depth research report specifically for the LTCC And HTCC industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.
The LTCC And HTCC market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to LTCC And HTCC market.
Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of LTCC And HTCC market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.
Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new LTCC And HTCC market. These factors have benefited the growth of the global market for LTCC And HTCC. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.
New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for LTCC And HTCC. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).
In this study, the years considered to estimate the market size of LTCC And HTCC are as follows:
Reasons to Purchase this Report:
- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.
This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.
Market Size Estimation
Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).
The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.
Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.
All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.
Market Breakdown and Data Triangulation
After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.
Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.
In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.
The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.
The study objectives of this report are:
Aromatherapy Market Size, Share, Trends, Growth, Production, Consumption, Revenue, Company Analysis and Forecast 2021-2030Read more...
Polypropylene Compounds Market Size, Share, Trends, Growth, Production, Consumption, Revenue, Company Analysis and Forecast 2021-2030Read more...
Turkey Automotive Plastic Compounding Market Size, Share, Trends, Growth, Production, Consumption, Revenue, Company Analysis and Forecast 2021-2030Read more...
Expanded Polypropylene Foam Market Size, Share, Trends, Growth, Production, Consumption, Revenue, Company Analysis and Forecast 2021-2030Read more...
Automotive Plastics Market Size, Share, Trends, Growth, Production, Consumption, Revenue, Company Analysis and Forecast 2021-2030Read more...