The global Reusable Face Mask market size is expected to be worth around US$ 7.08 billion by 2027, according to a new report by Vision Research Reports.
The global Reusable Face Mask market size was valued at US$ 1.3 billion in 2019 and is anticipated to grow at a CAGR of 23.5% during forecast period 2020 to 2027.
Growth Factors
Rising adoption of face masks as a precautionary measure to protect oneself from various diseases, including anthrax, influenza, avian bird flu, swine flu, Ebola, and the recent coronavirus, has been fueling the demand for reusable face masks among consumers. There has been growing awareness among people that masks are an effective way of controlling the spread of the virus from an infected person as well as the environment, which has been an immediate factor to spur the product demand. According to a simulation done by The University of California, 80% of the population wearing masks could do more to reduce the spread of COVID-19 than any strict lockdown measures.
Growing awareness about the ill effects of air pollution, dust, and smoke, and the outbreak of coronavirus are among the primary factors driving the market.
According to the American Lung Association, close to 133.9 million people in the U.S. are exposed to unhealthy air conditions every year. Face covering masks act as a shield to protect the wearer from the direct impact of harmful particles present in the air. As the air quality continues to deteriorate, the demand for face masks will keep increasing.
The widespread impact of the COVID-19 pandemic around the globe has been driving the demand for reusable face masks. According to the USA Facts report of September 2020, the country reported 6,060,334 known cases and registered deaths amounted to 184,280. With the restriction on the use of including N95, which are known to offer comparatively higher protection than other types of masks against the virus to healthcare workers, the demand for reusable mask has spurred among the general public.
These masks are highly recommended by the government and medical institutes as they reduce the chances of virus spread, which is favoring the market growth.
The ongoing COVID-19 pandemic is likely to increase the demand for reusable face masks across the globe. Demand is escalated with the increase in the number of COVID-19 cases worldwide
In terms of application, the personal segment led the market and accounted for 78.3% share of the global revenue in 2019. The COVID-19 pandemic has led to rising consumer awareness and maintenance of public protocol of wearing face masks. Moreover, manufacturers and designers have been launching products in bulk for the individual segment.
Asia Pacific held the largest revenue share of more than 33.0% in 2019. The growing demand for washable and reusable masks from densely-populated countries like India and China is expected to serve as a great growth booster for the region.
North America is expected to expand at the fastest CAGR from 2020 to 2027. The rise in the incidences of airborne diseases, pollution levels, forest fire cases, and the outbreak of the coronavirus have been encouraging a sizable number of consumers to opt for personal reusable face masks in the region.
Report Highlights
The online distribution channel is expected to emerge as the fastest-growing distribution channel throughout the forecast period. The increasing availability of a wide number of reusable face masks of different brands, free delivery, and seasonal discounts on e-retailer platforms are among the major reasons driving the segment
Asia Pacific held the largest share of more than 33.0% in 2019. The rising threat of the COVID-19 pandemic and growing air pollution have been the primary factors supporting market growth
In terms of material, the cotton segment led the market and accounted for 69.1% share of the global revenue in 2019. In June 2020, the Centers for Disease Control and Prevention recommended that people should wear a cloth face mask to avoid transmission of the coronavirus in public places
Key Players
Respro
Moldex-Metric
Vogmask
idMASK
Totobobo
Airpop
Kimberly Clark
Cambridge Mask Company
Debrief Me
ARAX Co., LTD.
Market Segmentation
Material Outlook
Cotton
Nylon
Others
Application Outlook
Commercial
Personal
Distribution Channel Outlook
Offline
Online
Regional Outlook
North America
U.S.
Europe
Germany
U.K.
France
Asia Pacific
China
India
Central & South America
Brazil
Middle East & Africa (MEA)
The Reusable Face Mask market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.
The report provides size (in terms of volume and value) of Reusable Face Mask market for the base year 2019 and the forecast between 2020 and 2027. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.
This report focuses on the global Reusable Face Mask market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Reusable Face Mask market development in United States, Europe and China.
It is pertinent to consider that in a volatile global economy, we haven’t just conducted Reusable Face Mask market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.
In terms of production side, this report researches the Reusable Face Mask capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.
In terms of consumption side, this report focuses on the consumption of Reusable Face Mask by regions (countries) and application.
Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global Reusable Face Mask market. These figures have been provided in terms of both revenue and volume for the period 2016 to 2027. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.
With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major Reusable Face Mask market companies.
Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of Reusable Face Mask market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.
The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.
Overall, this is an in-depth research report specifically for the Reusable Face Mask industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.
The Reusable Face Mask market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to Reusable Face Mask market.
Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of Reusable Face Mask market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.
Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new Reusable Face Mask market. These factors have benefited the growth of the global market for Reusable Face Mask. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.
New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for Reusable Face Mask. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).
In this study, the years considered to estimate the market size of Reusable Face Mask are as follows:
Reasons to Purchase this Report:
- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
Research Methodology:
In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.
This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.
Market Size Estimation
Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).
The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.
Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.
All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.
Market Breakdown and Data Triangulation
After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.
Secondary Sources
Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.
Primary Sources
In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.
The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.
The study objectives of this report are:
Chapter 1. Introduction
1.1. Research Objective
1.2. Scope of the Study
1.3. Definition
Chapter 2. Research Methodology
2.1. Research Approach
2.2. Data Sources
2.3. Assumptions & Limitations
Chapter 3. Executive Summary
3.1. Market Snapshot
Chapter 4. Market Variables and Scope
4.1. Introduction
4.2. Market Classification and Scope
4.3. Industry Value Chain Analysis
4.3.1. Raw Material Procurement Analysis
4.3.2. Sales and Distribution Channel Analysis
4.3.3. Downstream Buyer Analysis
Chapter 5. Market Dynamics Analysis and Trends
5.1. Market Dynamics
5.1.1. Market Drivers
5.1.2. Market Restraints
5.1.3. Market Opportunities
5.2. Porter’s Five Forces Analysis
5.2.1. Bargaining power of suppliers
5.2.2. Bargaining power of buyers
5.2.3. Threat of substitute
5.2.4. Threat of new entrants
5.2.5. Degree of competition
Chapter 6. Competitive Landscape
6.1.1. Company Market Share/Positioning Analysis
6.1.2. Key Strategies Adopted by Players
6.1.3. Vendor Landscape
6.1.3.1. List of Suppliers
6.1.3.2. List of Buyers
Chapter 7. Global Reusable Face Mask Market, By Material
7.1. Reusable Face Mask Market, by Material, 2021-2030
7.1.1. Cotton
7.1.1.1. Market Revenue and Forecast (2016-2030)
7.1.2. Nylon
7.1.2.1. Market Revenue and Forecast (2016-2030)
7.1.3. Others
7.1.3.1. Market Revenue and Forecast (2016-2030)
Chapter 8. Global Reusable Face Mask Market, By Application
8.1. Reusable Face Mask Market, by Application, 2021-2030
8.1.1. Commercial
8.1.1.1. Market Revenue and Forecast (2016-2030)
8.1.2. Personal
8.1.2.1. Market Revenue and Forecast (2016-2030)
Chapter 9. Global Reusable Face Mask Market, By Distribution Channel
9.1. Reusable Face Mask Market, by Distribution Channel, 2021-2030
9.1.1. Offline
9.1.1.1. Market Revenue and Forecast (2016-2030)
9.1.2. Online
9.1.2.1. Market Revenue and Forecast (2016-2030)
Chapter 10. Global Reusable Face Mask Market, Regional Estimates and Trend Forecast
10.1. North America
10.1.1. Market Revenue and Forecast, by Material (2016-2030)
10.1.2. Market Revenue and Forecast, by Application (2016-2030)
10.1.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.1.4. U.S.
10.1.4.1. Market Revenue and Forecast, by Material (2016-2030)
10.1.4.2. Market Revenue and Forecast, by Application (2016-2030)
10.1.4.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.1.5. Rest of North America
10.1.5.1. Market Revenue and Forecast, by Material (2016-2030)
10.1.5.2. Market Revenue and Forecast, by Application (2016-2030)
10.1.5.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.2. Europe
10.2.1. Market Revenue and Forecast, by Material (2016-2030)
10.2.2. Market Revenue and Forecast, by Application (2016-2030)
10.2.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.2.4. UK
10.2.4.1. Market Revenue and Forecast, by Material (2016-2030)
10.2.4.2. Market Revenue and Forecast, by Application (2016-2030)
10.2.4.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.2.5. Germany
10.2.5.1. Market Revenue and Forecast, by Material (2016-2030)
10.2.5.2. Market Revenue and Forecast, by Application (2016-2030)
10.2.5.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.2.6. France
10.2.6.1. Market Revenue and Forecast, by Material (2016-2030)
10.2.6.2. Market Revenue and Forecast, by Application (2016-2030)
10.2.6.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.2.7. Rest of Europe
10.2.7.1. Market Revenue and Forecast, by Material (2016-2030)
10.2.7.2. Market Revenue and Forecast, by Application (2016-2030)
10.2.7.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.3. APAC
10.3.1. Market Revenue and Forecast, by Material (2016-2030)
10.3.2. Market Revenue and Forecast, by Application (2016-2030)
10.3.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.3.4. India
10.3.4.1. Market Revenue and Forecast, by Material (2016-2030)
10.3.4.2. Market Revenue and Forecast, by Application (2016-2030)
10.3.4.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.3.5. China
10.3.5.1. Market Revenue and Forecast, by Material (2016-2030)
10.3.5.2. Market Revenue and Forecast, by Application (2016-2030)
10.3.5.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.3.6. Japan
10.3.6.1. Market Revenue and Forecast, by Material (2016-2030)
10.3.6.2. Market Revenue and Forecast, by Application (2016-2030)
10.3.6.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.3.7. Rest of APAC
10.3.7.1. Market Revenue and Forecast, by Material (2016-2030)
10.3.7.2. Market Revenue and Forecast, by Application (2016-2030)
10.3.7.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.4. MEA
10.4.1. Market Revenue and Forecast, by Material (2016-2030)
10.4.2. Market Revenue and Forecast, by Application (2016-2030)
10.4.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.4.4. GCC
10.4.4.1. Market Revenue and Forecast, by Material (2016-2030)
10.4.4.2. Market Revenue and Forecast, by Application (2016-2030)
10.4.4.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.4.5. North Africa
10.4.5.1. Market Revenue and Forecast, by Material (2016-2030)
10.4.5.2. Market Revenue and Forecast, by Application (2016-2030)
10.4.5.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.4.6. South Africa
10.4.6.1. Market Revenue and Forecast, by Material (2016-2030)
10.4.6.2. Market Revenue and Forecast, by Application (2016-2030)
10.4.6.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.4.7. Rest of MEA
10.4.7.1. Market Revenue and Forecast, by Material (2016-2030)
10.4.7.2. Market Revenue and Forecast, by Application (2016-2030)
10.4.7.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.5. Latin America
10.5.1. Market Revenue and Forecast, by Material (2016-2030)
10.5.2. Market Revenue and Forecast, by Application (2016-2030)
10.5.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.5.4. Brazil
10.5.4.1. Market Revenue and Forecast, by Material (2016-2030)
10.5.4.2. Market Revenue and Forecast, by Application (2016-2030)
10.5.4.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
10.5.5. Rest of LATAM
10.5.5.1. Market Revenue and Forecast, by Material (2016-2030)
10.5.5.2. Market Revenue and Forecast, by Application (2016-2030)
10.5.5.3. Market Revenue and Forecast, by Distribution Channel (2016-2030)
Chapter 11. Company Profiles
11.1. Respro
11.1.1. Company Overview
11.1.2. Product Offerings
11.1.3. Financial Performance
11.1.4. Recent Initiatives
11.2. Moldex-Metric
11.2.1. Company Overview
11.2.2. Product Offerings
11.2.3. Financial Performance
11.2.4. Recent Initiatives
11.3. Vogmask
11.3.1. Company Overview
11.3.2. Product Offerings
11.3.3. Financial Performance
11.3.4. Recent Initiatives
11.4. idMASK
11.4.1. Company Overview
11.4.2. Product Offerings
11.4.3. Financial Performance
11.4.4. Recent Initiatives
11.5. Totobobo
11.5.1. Company Overview
11.5.2. Product Offerings
11.5.3. Financial Performance
11.5.4. Recent Initiatives
11.6. Airpop
11.6.1. Company Overview
11.6.2. Product Offerings
11.6.3. Financial Performance
11.6.4. Recent Initiatives
11.7. Kimberly Clark
11.7.1. Company Overview
11.7.2. Product Offerings
11.7.3. Financial Performance
11.7.4. Recent Initiatives
11.8. Cambridge Mask Company
11.8.1. Company Overview
11.8.2. Product Offerings
11.8.3. Financial Performance
11.8.4. Recent Initiatives
11.9. Debrief Me
11.9.1. Company Overview
11.9.2. Product Offerings
11.9.3. Financial Performance
11.9.4. Recent Initiatives
11.10. ARAX Co., LTD.
11.10.1. Company Overview
11.10.2. Product Offerings
11.10.3. Financial Performance
11.10.4. Recent Initiatives
Chapter 12. Research Methodology
12.1. Primary Research
12.2. Secondary Research
12.3. Assumptions
Chapter 13. Appendix
13.1. About Us
Glossary of Terms