Stereotactic Surgery Devices Market Size, Share, Trends, Growth, Production, Consumption, Revenue, Company Analysis and Forecast 2021-2030

Published Date : Feb 2021 | No. of Pages : 250 Pages | Category : Healthcare

The global Stereotactic Surgery Devices market size is expected to be worth around US$ 30.9  billion by 2030, according to a new report by Vision Research Reports.

The global Stereotactic Surgery Devices market size was valued at US$ 26.2 billion in 2020 and is anticipated to grow at a CAGR of 6.9% during forecast period 2021 to 2030.

Growth Factors

Stereotactic surgery is a minimally invasive alternative for traditional invasive ablation and biopsy methods. Since, stereotactic surgery has various advantages such as higher efficacy, minimal or no surgical incisions, and lower risk of damage to healthy cells, it is replacing conventional radiotherapies. These surgical procedures have helped overcome drawbacks associated with traditional invasive surgeries, such as destruction of healthy cells and higher risk of recurrence & postoperative complications.

Only around 10.0% of the population in low and middle-income countries have access to radiation therapy, owing to dearth of radiation therapy devices. A market leader, Elekta, in its 2016 annual report stated that the number of installations of linear accelerators in high-income countries was approximately 13,000, whereas the requirement was around 25,000. Hence, huge demand-supply discrepancy of radiotherapy devices is likely to open new avenues for major market players in developing countries.

Report Highlights

On the basis of product, the market is segmented into gamma knife, linear accelerator (LINAC), proton beam radiotherapy, and CyberKnife. LINAC accounted for the largest volume share owing to high number of installations and adoption. However, the CyberKnife segment is expected to expand at the highest CAGR in terms of both volume and value over the forecast period, owing to its growing popularity in developing countries.

High adoption of LINACs is attributed to its higher efficacy in treating the affected areas with a higher dosage of radiation while maintaining a lower risk of damage to healthy cells. Reduced surgical pain is also boosting its adoption over conventional radiotherapies. Moreover, a number of associations are undertaking awareness campaigns to educate people about new technologies and their advantages. The abovementioned factors are likely to contribute to the growth of the segment.

However, with the introduction of advanced technology enabling better visualization, the price of treatment has reduced, which has affected the return on investment, impeding the growth of the stereotactic surgery devices market. On the other hand, the CyberKnife segment is poised to exhibit the fastest growth over the forecast period. Some of the clinical benefits of CyberKnife are target specificity with a high dosage of radiation, continued visualization, and complete automation. These merits are projected to supplement the growth of the segment over the forecast period.

North America dominated the overall market in 2020. The trend is anticipated to continue until 2025. The growth of the region can be attributed to growing prevalence of cancer, increasing government initiatives for creating awareness about availability of advanced treatment modalities, and presence of well-developed healthcare infrastructure.

The U.S. is the largest contributor in terms of revenue to the North American market. Higher spending capacity and domicile of major market players are the key factors that can be attributed to the dominance of the country within the region.

Rapidly developing economies, such as Brazil, Mexico, and Argentina, in Latin America are estimated to stimulate the growth of the regional market. Favorable regulatory policies and rising awareness among healthcare professionals regarding the benefits of stereotactic surgery devices are promoting the growth of the market.

Key Players

Siemens Ag; Elekta AB; Varian Medical Systems; IBA; Accuray Incorporated

Market Segmentation

  • Product Type Outlook 

    • Gamma Knife

    • LINAC

    • PBRT

    • CyberKnife

  • Regional Outlook 

    • North America

      • The U.S.

      • Canada

    • Europe

      • The U.K.

      • Germany

      • Greece

      • Italy

      • Spain

      • France

      • Belgium

      • Sweden

    • Asia Pacific

      • Japan

      • India

      • China

      • Australia

      • Singapore

      • South Korea

      • Malaysia

      • New Zealand

      • Indonesia

      • Hong Kong

    • Latin America

      • Mexico

      • Brazil

      • Argentina

    • MEA

      • Morocco

      • Kuwait

      • Iran

      • South Africa

The Stereotactic Surgery Devices market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.

The report provides size (in terms of volume and value) of Stereotactic Surgery Devices market for the base year 2020 and the forecast between 2021 and 2030. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.

This report focuses on the global Stereotactic Surgery Devices market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Stereotactic Surgery Devices market development in United States, Europe and China.

It is pertinent to consider that in a volatile global economy, we haven’t just conducted Stereotactic Surgery Devices market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.

In terms of production side, this report researches the Stereotactic Surgery Devices capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.

In terms of consumption side, this report focuses on the consumption of Stereotactic Surgery Devices by regions (countries) and application.

Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global Stereotactic Surgery Devices market. These figures have been provided in terms of both revenue and volume for the period 2017 to 2030. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.

With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major Stereotactic Surgery Devices market companies.

Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of Stereotactic Surgery Devices market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.

The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.

Overall, this is an in-depth research report specifically for the Stereotactic Surgery Devices industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.

The Stereotactic Surgery Devices market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to Stereotactic Surgery Devices market.

Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of Stereotactic Surgery Devices market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.

Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new Stereotactic Surgery Devices market. These factors have benefited the growth of the global market for Stereotactic Surgery Devices. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.

New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for Stereotactic Surgery Devices. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).

In this study, the years considered to estimate the market size of Stereotactic Surgery Devices are as follows:

  • Historic Year: 2017-2020
  • Base Year: 2021
  • Forecast Year 2021 to 2030

Reasons to Purchase this Report:

- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players

Research Methodology:

In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.

This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.

Market Size Estimation

Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).

The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.

Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.

All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.

Market Breakdown and Data Triangulation

After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.

Secondary Sources

Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.

Primary Sources

 In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.

The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.

The study objectives of this report are:

  • To analyze and study the global market capacity, production, value, consumption, status (2017-2020) and forecast (2021-2030);
  • Focuses on the key manufacturers, to study the capacity, production, value, market share and development plans in future.
  • Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
  • To define, describe and forecast the market by type, application and region.
  • To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
  • To identify significant trends and factors driving or inhibiting the market growth.
  • To analyze the opportunities in the market for stakeholders by identifying the high growth segments.
  • To strategically analyze each submarket with respect to individual growth trend and their contribution to the market
  • To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market
  • To strategically profile the key players and comprehensively analyze their growth strategies.

Featured Research Reports

  • Featured Research Reports

    Pulse Electromagnetic Field Therapy Devices Market (By Power: Low Frequency, High Frequency; By Application: Pain Management, Bone Growth; By End-use: Hospitals, Home Care Settings) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...
  • Featured Research Reports

    Hospital Consumables Market (By Product: Disposable Medical Gloves, IV Kits, Medical Gauze & Tapes, Disposable Syringes, Sharps Disposable Containers, Catheters, Non-woven Disposable Products, Surgical Blades, Medicine Cups, Cannula, Guidewires, Thermometer, Stethoscope, Glucometer Strips, IV Solutions) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...
  • Featured Research Reports

    Rat And Mouse Model Market (By Type: Knockout, Knock-in, Outbred, Inbred; By Technology: Nuclear transferase, Microinjection, Embryonic stem cells, CRISPR/Cas9; By Service: Cryopreservation, Breeding, Rederivation, Genetic testing, Quarantine depending; By Application: Cardiovascular diseases, Genetic diseases, Cancer, Infectious diseases, Transplantation, Toxicology studies; By End-use: Pharmaceutical companies, Academic and research facilities, Biotechnology companies, Contract research & manufacturing organizations) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...
  • Featured Research Reports

    Healthcare ERP Market (By Function: Inventory and Material Management, Supply Chain and Logistics Management, Patient Relationship Management, Finance and Billing; By Deployment: On-premises, Cloud) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...
  • Featured Research Reports

    Biotechnology & Pharmaceutical Services Outsourcing Market (By Service: Consulting, Auditing and Assessment, Regulatory Affairs, Product Maintenance, Product Design & Development, Product Testing & Validation, Training & Education; By End-use: Pharma, Biotech) - Global Industry Analysis, Size, Share, Growth, Trends, Revenue, Regional Outlook 2021 – 2030

    Read more...