Wound Closure Devices Market Size, Share, Trends, Growth, Production, Consumption, Revenue, Company Analysis and Forecast 2021-2028

The global Wound Closure Devices market size is expected to be worth around US$ 23.01 billion by 2028, according to a new report by Vision Research Reports.

The global Wound Closure Devices market size was valued at US$ 14.23 billion in 2020 and is anticipated to grow at a CAGR of 8.1% during forecast period 2021 to 2028.

Growth Factors

Increasing prevalence of chronic injuries, technological advancements, and rising number of road accidents and surgeries are expected to propel market growth.

Rising incidence of road accidents across the globe has led to increase in demand for various wound closure devices. For instance, as per the reports on Road Traffic Injuries by WHO, every year 20 million to 50 million people suffer from some kind of injuries or disabilities resulting from road accidents. Moreover, increasing prevalence of burn and trauma cases globally is anticipated to drive the market. For instance, as per WHO (2018), around 1,000,000 people suffer from severe or moderate burns in India, each year. In addition, as per the National Center for Biotechnology Information (NCBI), in 2017, countries such as Bulgaria, Finland, the Netherlands, and China reported a rise in incidence of burn injuries. Wound closure devices, such as adhesives, staples, and sutures, are required for the treatment of such injuries.

Report Highlights

On the basis of product, the market has been segmented into adhesives, staples, sutures, strips, sealants, and mechanical wound closure devices. Sutures held the dominant market share in 2020 owing to the rising number of accidents across the globe. Sutures comprise a needle with a thread attached to it and it comes in various shapes, sizes, and a wide variety of thread materials. Sutures market has been further segmented into absorbable and non-absorbable. The absorbable sutures market is anticipated to witness the fastest growth over the forecast period as they are more convenient and easy-to-use as compared to the non-absorbable sutures.

The staples segment is anticipated to witness the fastest growth over the forecast period. The usage of staples is on a rise as stapling is more convenient and faster than suturing. Surgical staples are usually made of titanium or stainless steel. Staple lines can be circular, straight, or curved. However, unlike sutures, staples are not absorbable, and thus requires constant care. This factor might restrain segment growth.

The wound closure devices market has been segmented into chronic and acute. The acute segment held the dominant market share in 2018 owing to the rising number of surgeries and burn cases, globally. For instance, as per WHO, in South Africa, approximately USD 26.00 million is spent every year on the care of burns resulting from kerosene cooking stove incidents. Such acute injuries require quick closure using advanced medical devices. The major reasons leading to the high prevalence of burn cases include poverty, lack of proper safety measures, use of kerosene for non-electric domestic appliances, alcohol abuse, and smoking.

Chronic wounds include diabetic foot ulcers, venous leg ulcers, and pressure ulcers. Increasing cases of chronic diseases, especially diabetes, and rising geriatric population across the globe are the major factors driving the segment. For instance, as per the United States Census Bureau, the number of people aged 65 and above grew by 1.6 million from 2014 to 2015. Increasing geriatric population susceptible to chronic diseases and injuries is expected to impel the demand for wound closure devices.

End-users of wound closure devices are hospitals, hospitals, clinics, trauma centers, and others. The hospital segment held the largest market share in 2020 due to the rising number of surgeries and increasing cases of road accidents. For instance, as per WHO, around 1.35 million people die every year in road accidents and it costs almost 3.0% of the Gross Domestic Product (GDP) for most of the countries.

The clinic segment is anticipated to witness the fastest growth over the forecast period owing to the increasing demand for reduced hospital stay. As per the American Hospital Association (AHA), approximately 20.0% of Medicare beneficiaries, when discharged from hospitals, return within 30 days for the closure of fresh wounds. Identifying and reducing avoidable readmissions is expected to improve healthcare safety and minimizing expenditure. Hence, policymakers are striving to reduce the stay of patients in hospitals.

The North America market held the dominant share in 2018 owing to the presence of major players in the region and the rising prevalence of chronic wounds. In addition, the increasing number of patients undergoing surgeries and rising awareness about minimally invasive surgeries are also responsible for regional market growth.

Key Players

3M; Johnson & Johnson Services, Inc.; B. Braun Melsungen AG; Medtronic; Baxter; Integra LifeSciences Corporation; and Smith & Nephew.

Market Segmentation

  • Product Outlook

    • Adhesives

    • Staples

    • Sutures

      • Absorbable

      • Non-absorbable

    • Strips

      • Sterile

      • Non-Sterile

    • Sealants

      • Synthetic

      • Non-synthetic

      • Collagen-based

    • Mechanical wound closure devices

  • Wound Type Outlook

    • Chronic

    • Acute

  • End-use Outlook 

    • Hospital

    • Clinics

    • Trauma centers

    • Others

  • Regional Outlook 

    • North America

      • The U.S.

      • Canada

    • Europe

      • U.K.

      • Germany

    • Asia Pacific

      • China

      • Japan

    • Latin America

      • Brazil

      • Mexico

    • MEA

      • South Africa

      • Saudi Arabia

The Wound Closure Devices market research report covers definition, classification, product classification, product application, development trend, product technology, competitive landscape, industrial chain structure, industry overview, national policy and planning analysis of the industry, the latest dynamic analysis, etc., and also includes major. The study includes drivers and restraints of the global market. It covers the impact of these drivers and restraints on the demand during the forecast period. The report also highlights opportunities in the market at the global level.

The report provides size (in terms of volume and value) of Wound Closure Devices market for the base year 2020 and the forecast between 2021 and 2028. Market numbers have been estimated based on form and application. Market size and forecast for each application segment have been provided for the global and regional market.

This report focuses on the global Wound Closure Devices market status, future forecast, growth opportunity, key market and key players. The study objectives are to present the Wound Closure Devices market development in United States, Europe and China.

It is pertinent to consider that in a volatile global economy, we haven’t just conducted Wound Closure Devices market forecasts in terms of CAGR, but also studied the market based on key parameters, including Year-on-Year (Y-o-Y) growth, to comprehend the certainty of the market and to find and present the lucrative opportunities in market.

In terms of production side, this report researches the Wound Closure Devices capacity, production, value, ex-factory price, growth rate, market share for major manufacturers, regions (or countries) and type.

In terms of consumption side, this report focuses on the consumption of Wound Closure Devices by regions (countries) and application.

Buyers of the report will have access to verified market figures, including global market size in terms of revenue and volume. As part of production analysis, the authors of the report have provided reliable estimations and calculations for global revenue and volume by Type segment of the global Wound Closure Devices market. These figures have been provided in terms of both revenue and volume for the period 2017 to 2028. Additionally, the report provides accurate figures for production by region in terms of revenue as well as volume for the same period. The report also includes production capacity statistics for the same period.

With regard to production bases and technologies, the research in this report covers the production time, base distribution, technical parameters, research and development trends, technology sources, and sources of raw materials of major Wound Closure Devices market companies.

Regarding the analysis of the industry chain, the research of this report covers the raw materials and equipment of Wound Closure Devices market upstream, downstream customers, marketing channels, industry development trends and investment strategy recommendations. The more specific analysis also includes the main application areas of market and consumption, major regions and Consumption, major Chinese producers, distributors, raw material suppliers, equipment providers and their contact information, industry chain relationship analysis.

The research in this report also includes product parameters, production process, cost structure, and data information classified by region, technology and application. Finally, the paper model new project SWOT analysis and investment feasibility study of the case model.

Overall, this is an in-depth research report specifically for the Wound Closure Devices industry. The research center uses an objective and fair way to conduct an in-depth analysis of the development trend of the industry, providing support and evidence for customer competition analysis, development planning, and investment decision-making. In the course of operation, the project has received support and assistance from technicians and marketing personnel in various links of the industry chain.

The Wound Closure Devices market competitive landscape provides details by competitor. Details included are company overview, company financials, revenue generated, market potential, investment in research and development, new market initiatives, global presence, production sites and facilities, production capacities, company strengths and weaknesses, product launch, product width and breadth, application dominance. The above data points provided are only related to the companies’ focus related to Wound Closure Devices market.

Prominent players in the market are predicted to face tough competition from the new entrants. However, some of the key players are targeting to acquire the startup companies in order to maintain their dominance in the global market. For a detailed analysis of key companies, their strengths, weaknesses, threats, and opportunities are measured in the report by using industry-standard tools such as the SWOT analysis. Regional coverage of key companies is covered in the report to measure their dominance. Key manufacturers of Wound Closure Devices market are focusing on introducing new products to meet the needs of the patrons. The feasibility of new products is also measured by using industry-standard tools.

Key companies are increasing their investments in research and development activities for the discovery of new products. There has also been a rise in the government funding for the introduction of new Wound Closure Devices market. These factors have benefited the growth of the global market for Wound Closure Devices. Going forward, key companies are predicted to benefit from the new product launches and the adoption of technological advancements. Technical advancements have benefited many industries and the global industry is not an exception.

New product launches and the expansion of already existing business are predicted to benefit the key players in maintaining their dominance in the global market for Wound Closure Devices. The global market is segmented on the basis of region, application, en-users and product type. Based on region, the market is divided into North America, Europe, Asia-Pacific, Latin America and Middle East and Africa (MEA).

In this study, the years considered to estimate the market size of Wound Closure Devices are as follows:

  • Historic Year: 2017-2020
  • Base Year: 2020
  • Forecast Year 2021 to 2028

Reasons to Purchase this Report:

- Market segmentation analysis including qualitative and quantitative research incorporating the impact of economic and policy aspects
- Regional and country level analysis integrating the demand and supply forces that are influencing the growth of the market.
- Market value USD Million and volume Units Million data for each segment and sub-segment
- Competitive landscape involving the market share of major players, along with the new projects and strategies adopted by players in the past five years
- Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players

Research Methodology:

In-depth interviews and discussions were conducted with several key market participants and opinion leaders to compile the research report.

This research study involved the extensive usage of both primary and secondary data sources. The research process involved the study of various factors affecting the industry, including the government policy, market environment, competitive landscape, historical data, present trends in the market, technological innovation, upcoming technologies and the technical progress in related industry, and market risks, opportunities, market barriers and challenges. The following illustrative figure shows the market research methodology applied in this report.

Market Size Estimation

Top-down and bottom-up approaches are used to estimate and validate the global market size for company, regional division, product type and application (end users).

The market estimations in this report are based on the selling price (excluding any discounts provided by the manufacturer, distributor, wholesaler or traders). Market share analysis, assigned to each of the segments and regions are achieved through product utilization rate and average selling price.

Major manufacturers & their revenues, percentage splits, market shares, growth rates and breakdowns of the product markets are determined through secondary sources and verified through the primary sources.

All possible factors that influence the markets included in this research study have been accounted for, viewed in extensive detail, verified through primary research, and analyzed to get the final quantitative and qualitative data. The market size for top-level markets and sub-segments is normalized, and the effect of inflation, economic downturns, and regulatory & policy changes or others factors are accounted for in the market forecast. This data is combined and added with detailed inputs and analysis from Vision Research Reports and presented in this report.

Market Breakdown and Data Triangulation

After complete market engineering with calculations for market statistics; market size estimations; market forecasting; market breakdown; and data triangulation. Extensive primary research was conducted to gather information and verify and validate the critical numbers arrived at. In the complete market engineering process, both top-down and bottom-up approaches were extensively used, along with several data triangulation methods, to perform market estimation and market forecasting for the overall market segments and sub-segments listed in this report.

Secondary Sources

Secondary Sources occupies approximately 25% of data sources, such as press releases, annual reports, Non-Profit organizations, industry associations, governmental agencies and customs data, and so on. This research study includes secondary sources; directories; databases such as Bloomberg Business, Wind Info, Hoovers, Factiva (Dow Jones & Company), TRADING ECONOMICS, and avention; Investing News Network; statista; Federal Reserve Economic Data; annual reports; investor presentations; and SEC filings of companies.

Primary Sources

 In the primary research process, various sources from both the supply and demand sides were interviewed to obtain qualitative and quantitative information for this report. The primary sources from the supply side include product manufacturers (and their competitors), opinion leaders, industry experts, research institutions, distributors, dealer and traders, as well as the raw materials suppliers and producers, etc.

The primary sources from the demand side include industry experts such as business leaders, marketing and sales directors, technology and innovation directors, supply chain executive, end users (product buyers), and related key executives from various key companies and organizations operating in the global market.

The study objectives of this report are:

  • To analyze and study the global market capacity, production, value, consumption, status (2017-2020) and forecast (2021-2028);
  • Focuses on the key manufacturers, to study the capacity, production, value, market share and development plans in future.
  • Comprehensive company profiles covering the product offerings, key financial information, recent developments, SWOT analysis, and strategies employed by the major market players
  • To define, describe and forecast the market by type, application and region.
  • To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
  • To identify significant trends and factors driving or inhibiting the market growth.
  • To analyze the opportunities in the market for stakeholders by identifying the high growth segments.
  • To strategically analyze each submarket with respect to individual growth trend and their contribution to the market
  • To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market
  • To strategically profile the key players and comprehensively analyze their growth strategies.

Chapter 1.  Introduction

1.1.  Research Objective

1.2.  Scope of the Study

1.3.  Definition

Chapter 2.  Research Methodology

2.1.  Research Approach

2.2.  Data Sources

2.3.  Assumptions & Limitations

Chapter 3.  Executive Summary

3.1.  Market Snapshot

Chapter 4.  Market Variables and Scope

4.1.  Introduction

4.2.  Market Classification and Scope

4.3.  Industry Value Chain Analysis

4.3.1.    Raw Material Procurement Analysis

4.3.2.    Sales and Distribution Channel Analysis

4.3.3.    Downstream Buyer Analysis

Chapter 5.  Market Dynamics Analysis and Trends

5.1.  Market Dynamics

5.1.1.    Market Drivers

5.1.2.    Market Restraints

5.1.3.    Market Opportunities

5.2.  Porter’s Five Forces Analysis

5.2.1.    Bargaining power of suppliers

5.2.2.    Bargaining power of buyers

5.2.3.    Threat of substitute

5.2.4.    Threat of new entrants

5.2.5.    Degree of competition

Chapter 6.  Competitive Landscape

6.1.1.    Company Market Share/Positioning Analysis

6.1.2.    Key Strategies Adopted by Players

6.1.3.    Vendor Landscape

6.1.3.1.        List of Suppliers

6.1.3.2.        List of Buyers

Chapter 7.  Global Wound Closure Devices Market, By Product

7.1.  Wound Closure Devices Market, By Product, 2021-2028

7.1.1.    Adhesives

7.1.1.1.        Market Revenue and Forecast (2016-2028)

7.1.2.    Staples

7.1.2.1.        Market Revenue and Forecast (2016-2028)

7.1.3.    Sutures

7.1.3.1.        Market Revenue and Forecast (2016-2028)

7.1.4.    Strips

7.1.4.1.        Market Revenue and Forecast (2016-2028)

7.1.5.    Sealants

7.1.5.1.        Market Revenue and Forecast (2016-2028)

7.1.6.    Mechanical wound closure devices

7.1.6.1.        Market Revenue and Forecast (2016-2028)

Chapter 8.  Global Wound Closure Devices Market, By Wound Type

8.1.  Wound Closure Devices Market, By Wound Type, 2021-2028

8.1.1.    Chronic

8.1.1.1.        Market Revenue and Forecast (2016-2028)

8.1.2.    Acute

8.1.2.1.        Market Revenue and Forecast (2016-2028)

Chapter 9.  Global Wound Closure Devices Market, By End User

9.1.  Wound Closure Devices Market, by End User, 2021-2028

9.1.1.    Hospital

9.1.1.1.        Market Revenue and Forecast (2016-2028)

9.1.2.    Clinics

9.1.2.1.        Market Revenue and Forecast (2016-2028)

9.1.3.    Trauma centers

9.1.3.1.        Market Revenue and Forecast (2016-2028)

9.1.4.    Others

9.1.4.1.        Market Revenue and Forecast (2016-2028)

Chapter 10.      Global Wound Closure Devices Market, Regional Estimates and Trend Forecast

10.1.        North America

10.1.1.  Market Revenue and Forecast, By Product (2016-2028)

10.1.2.  Market Revenue and Forecast, By Wound Type (2016-2028)

10.1.3.  Market Revenue and Forecast, by End User (2016-2028)

10.1.4.  U.S.

10.1.4.1.      Market Revenue and Forecast, By Product (2016-2028)

10.1.4.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.1.4.3.      Market Revenue and Forecast, by End User (2016-2028)

10.1.5.  Rest of North America

10.1.5.1.      Market Revenue and Forecast, By Product (2016-2028)

10.1.5.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.1.5.3.      Market Revenue and Forecast, by End User (2016-2028)

10.2.        Europe

10.2.1.  Market Revenue and Forecast, By Product (2016-2028)

10.2.2.  Market Revenue and Forecast, By Wound Type (2016-2028)

10.2.3.  Market Revenue and Forecast, by End User (2016-2028)

10.2.4.  UK

10.2.4.1.      Market Revenue and Forecast, By Product (2016-2028)

10.2.4.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.2.4.3.      Market Revenue and Forecast, by End User (2016-2028)

10.2.5.  Germany

10.2.5.1.      Market Revenue and Forecast, By Product (2016-2028)

10.2.5.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.2.5.3.      Market Revenue and Forecast, by End User (2016-2028)

10.2.6.  France

10.2.6.1.      Market Revenue and Forecast, By Product (2016-2028)

10.2.6.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.2.6.3.      Market Revenue and Forecast, by End User (2016-2028)

10.2.7.  Rest of Europe

10.2.7.1.      Market Revenue and Forecast, By Product (2016-2028)

10.2.7.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.2.7.3.      Market Revenue and Forecast, by End User (2016-2028)

10.3.        APAC

10.3.1.  Market Revenue and Forecast, By Product (2016-2028)

10.3.2.  Market Revenue and Forecast, By Wound Type (2016-2028)

10.3.3.  Market Revenue and Forecast, by End User (2016-2028)

10.3.4.  India

10.3.4.1.      Market Revenue and Forecast, By Product (2016-2028)

10.3.4.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.3.4.3.      Market Revenue and Forecast, by End User (2016-2028)

10.3.5.  China

10.3.5.1.      Market Revenue and Forecast, By Product (2016-2028)

10.3.5.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.3.5.3.      Market Revenue and Forecast, by End User (2016-2028)

10.3.6.  Japan

10.3.6.1.      Market Revenue and Forecast, By Product (2016-2028)

10.3.6.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.3.6.3.      Market Revenue and Forecast, by End User (2016-2028)

10.3.7.  Rest of APAC

10.3.7.1.      Market Revenue and Forecast, By Product (2016-2028)

10.3.7.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.3.7.3.      Market Revenue and Forecast, by End User (2016-2028)

10.4.        MEA

10.4.1.  Market Revenue and Forecast, By Product (2016-2028)

10.4.2.  Market Revenue and Forecast, By Wound Type (2016-2028)

10.4.3.  Market Revenue and Forecast, by End User (2016-2028)

10.4.4.  GCC

10.4.4.1.      Market Revenue and Forecast, By Product (2016-2028)

10.4.4.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.4.4.3.      Market Revenue and Forecast, by End User (2016-2028)

10.4.5.  North Africa

10.4.5.1.      Market Revenue and Forecast, By Product (2016-2028)

10.4.5.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.4.5.3.      Market Revenue and Forecast, by End User (2016-2028)

10.4.6.  South Africa

10.4.6.1.      Market Revenue and Forecast, By Product (2016-2028)

10.4.6.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.4.6.3.      Market Revenue and Forecast, by End User (2016-2028)

10.4.7.  Rest of MEA

10.4.7.1.      Market Revenue and Forecast, By Product (2016-2028)

10.4.7.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.4.7.3.      Market Revenue and Forecast, by End User (2016-2028)

10.5.        Latin America

10.5.1.  Market Revenue and Forecast, By Product (2016-2028)

10.5.2.  Market Revenue and Forecast, By Wound Type (2016-2028)

10.5.3.  Market Revenue and Forecast, by End User (2016-2028)

10.5.4.  Brazil

10.5.4.1.      Market Revenue and Forecast, By Product (2016-2028)

10.5.4.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.5.4.3.      Market Revenue and Forecast, by End User (2016-2028)

10.5.5.  Rest of LATAM

10.5.5.1.      Market Revenue and Forecast, By Product (2016-2028)

10.5.5.2.      Market Revenue and Forecast, By Wound Type (2016-2028)

10.5.5.3.      Market Revenue and Forecast, by End User (2016-2028)

Chapter 11.  Company Profiles

11.1.              3M

11.1.1.  Company Overview

11.1.2.  Product Offerings

11.1.3.  Financial Performance

11.1.4.  Recent Initiatives

11.2.              Johnson & Johnson Services, Inc.

11.2.1.  Company Overview

11.2.2.  Product Offerings

11.2.3.  Financial Performance

11.2.4.  Recent Initiatives

11.3.              B. Braun Melsungen AG

11.3.1.  Company Overview

11.3.2.  Product Offerings

11.3.3.  Financial Performance

11.3.4.  Recent Initiatives

11.4.              Medtronic

11.4.1.  Company Overview

11.4.2.  Product Offerings

11.4.3.  Financial Performance

11.4.4.  Recent Initiatives

11.5.              Baxter

11.5.1.  Company Overview

11.5.2.  Product Offerings

11.5.3.  Financial Performance

11.5.4.  Recent Initiatives

11.6.              Integra LifeSciences Corporation

11.6.1.  Company Overview

11.6.2.  Product Offerings

11.6.3.  Financial Performance

11.6.4.  Recent Initiatives

11.7.              Smith & Nephew

11.7.1.  Company Overview

11.7.2.  Product Offerings

11.7.3.  Financial Performance

11.7.4.  Recent Initiatives

Chapter 12.  Research Methodology

12.1.              Primary Research

12.2.              Secondary Research

12.3.              Assumptions

Chapter 13.  Appendix

13.1.              About Us

Glossary of Terms

Proceed To Buy

USD 4500
USD 3800
USD 1900
USD 1200

Customization Offered

  • check-imgCross-segment Market Size and Analysis for Mentioned Segments
  • check-imgAdditional Company Profiles (Upto 5 With No Cost)
  • check-img Additional Countries (Apart From Mentioned Countries)
  • check-img Country/Region-specific Report
  • check-img Go To Market Strategy
  • check-imgRegion Specific Market Dynamics
  • check-imgRegion Level Market Share
  • check-img Import Export Analysis
  • check-imgProduction Analysis
  • check-imgOthers